BP-130.R22
BP-150.R22
Planer type horizontal boring and milling machine with rotary table. Known for accurate movements and reliable accuracy. Spindle designed for optimum high speed and accuracy.
Return to Machine Tool Line-upMachine Specifications | BP-130.R22 | BP-150.R22 | |||
Travel |
X-axis travel (Cross movement of table) | mm (in) | 3 556 (140) [4 064 (160)] | ||
Y-axis travel (Vertical movement of spindle head) | mm (in) | 2 286(90) [2 540 (100)] | |||
Z-axis travel (Longitudinal movement of spindle head) | mm (in) | 1 524 (60) | |||
W-axis travel (Spindle extension) | mm (in) | 711.2 (28) | |||
Distance from table surface to spindle center | mm (in) | 0~2 286 (0~90) [0~2 540 (0~100)] | |||
Distance from table center to milling spindle gauge plane | mm (in) | 812.8~2 336.8 (32~92) | 609.6~2 133.6 (24~84) | ||
Table |
Table working surface | mm (in) | 1 800 x 2 200 (70.8 x 86.6) | ||
Table loading capacity | kg (lbs) | 20 000(44 000) [APC 10 000(22 000)] | |||
Table surface configuration | mm (in) |
11 T-slots, size 22, pitch 160 (11 T-slots, size 0.8661, pitch 6.3) |
|||
Minimum table indexing angle | degrees | 0.0001 | |||
Spindle |
Spindle diameter | mm (in) | 130 (5.1) | 150 (5.9) | |
Spindle speed range | min-1 | 5~2 500 [40~8 000 High speed spindle] | |||
Milling spindle nose diameter | mm (in) | 250 (9.8) | |||
Type of spindle taper hole | ISO 50 | ||||
Feedrate |
Rapid traverse rate | X, Y, Z | mm/min (ipm) | 10 000 (393) | |
W | mm/min (ipm) | 5 000 (196) | |||
B | deg/min | 500 | |||
Feedrate | X, Y, Z | mm/min (ipm) | 1 ~ 6 000 (0.04 ~ 236) | ||
Automatic tool changer |
Type of tool shank | CAT-50V | |||
Type of retention knob | MAS P50T-1 (45 degree) | ||||
Tool storage capacity | 38 [60, 90, 120] | ||||
Maximum tool diameter | When pots are full | mm (in) | 125 (4.9) | ||
When adjacent pots are empty | mm (in) | 240 (9.4) | |||
Maximum tool length | mm (in) | 400 (15.7) | |||
Maximum tool mass | kg (lbs) | 25 (55) | |||
Method of tool selection | Pot address random short-cut | ||||
Spindle drive motor |
kW (HP) |
AC30 (40) 30 min AC22 (30) cont. |
AC37 (50) 30 min AC30 (40) cont. |
||
Power source |
Electric power supply | AC208V +/-10%, 60Hz +/-2% | |||
Power Capacity | kVA | 75 | 85 | ||
Compressed air supply | Pressure | MPa (psi) [kgf/cm2] | 0.5 ~ 0.8 (72.5 ~ 116) [5 ~ 8] | ||
Flowrate | Nl/min(SCFM) | 750 (18) or over | 750 (21) or over | ||
Machine size |
Machine height | mm (in) | 5 215(206) | ||
Floor space | mm (in) |
7 450 x 9 500 (293.3 x
374) [7 620 x 10 210 (300 x 402)] |
|||
Mass of machine (including NC equipment) | kg (lbs) | 42 000 (92 400) [44 000 (96 800)] | |||
Accuracy |
Positioning accuracy | X, Y, Z | mm/min | +/-0.008 (0.0003) per full length | |
W | +/-0.012 (0.0005) per full length | ||||
Repeatability | X, Y, Z | +/-0.004 (0.00016) | |||
W | +/-0.008 (0.00031) | ||||
Table indexing accuracy | sec | +/-5 | |||
Table indexing repeatability | sec | +/-3 | |||
Machine colour |
R4-383 (Munsell 5Y8.4/0.5) and N2.5 For the NC system, servo motors and cooler, each maker's standard colour shall apply |
Notes:
Values in brackets [] refer to options.
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.