BTD-110H.R13/R16
Designed and built with functions for better cutting performance. A closed-loop control system for the X, Y, Z and B axes with standard 1µm linear scales and rotary scale provides guaranteed accuracy.
New digital pendant readout/pendant control
Telescopic Y axis way-cover
TOSNUC 999 CNC Control
Return to Machine Tool Line-upMachine Specifications | BTD-110H.R13 | BTD-110H.R16 | |||
Travel |
X-axis travel (Cross movement of table) | mm (in) | 1 600 (63) | 2 000 (78.7)
[2 500 (98.4)] |
|
Y-axis travel (Vertical movement of spindle head) | mm (in) | 1 250(49.2) | 1 500 (59.1) [1 800 (70.9)] |
||
Z-axis travel (Longitudinal movement of table) | mm (in) | 1 130 (44.5) | 1 450 (57.1) | ||
W-axis travel (Spindle extension) | mm (in) | 500 (19.7) | |||
Distance from table surface to spindle center | mm (in) | 0~1 250 (0~49.2) | 0~1 500
(0~59.1) [0~1 800(0~70.9)] |
||
Distance from table center to milling spindle gauge plane | mm (in) | 410~1 540 (16.1~60.6) | 550~2 000 (21.6~78.7) | ||
Table |
Table working surface | mm (in) | 1 120 x 1 250 (44.1 x 49.2) | 1 400 x 1 600 (55.1 x 63) | |
Table loading capacity | kg (lbs) | 4 000 (8 800) | 6 300 (13
860) [10 000 (22 000)] |
||
Table surface configuration (Pitch of T-slots 160 mm, size 22 mm) | 7 T-slots | 9 T-slots | |||
Minimum table indexing angle (B-axis) | degrees | 0.0001 | |||
Spindle |
Spindle diameter | mm (in) | 110 (4.3) | ||
Spindle speed range | min-1 | 5~3 000 | |||
Milling spindle nose diameter | mm (in) | 225 (8.9) | |||
Type of spindle taper hole | 7/24 taper No.50 | ||||
Feedrate |
Rapid traverse rate | X, Y, Z | mm/min (ipm) | 12 000 (472.4) | |
W | mm/min (ipm) | 5 000 (196.9) | |||
B | deg/min | 720 | |||
Feedrate | X, Y, Z | mm/min (ipm) | 1 ~ 6 000 (0.04 ~ 236.2) | ||
Automatic tool changer |
Type of tool shank | MAS BT50 | |||
Type of retention knob | MAS P50T-1 (45 degree) | ||||
Tool storage capacity | 38 {60, 90, 120} | ||||
Maximum tool diameter | When adjacent pots are filled | mm (in) | 125 (4.9) | ||
When adjacent pots are empty | mm (in) | 240 (9.4)/T type bar ø400 (15.7) | |||
Maximum tool length | mm (in) | 400 (15.7) | |||
Maximum tool mass | kg (lbs) | 25 (55) | |||
Tool selection | Pot address random short-cut | ||||
Spindle drive motor |
(30 min./cont. rating) | kW (HP) | AC15/11 (20/15)
{AC22/18.5, AC30/22 (AC30/25, AC40/30)} |
||
Power source |
Electric power supply | AC200/220V +/-10%, 50/60Hz +/-2% | |||
Power Capacity | kVA | 47 {58, 64} | |||
Compressed air supply | Pressure | MPa (psi) | 0.5 ~ 0.8 (72.5 ~ 116) | ||
Flowrate | Nl(gal)/min | 500 (132) | |||
Machine size |
Machine height | mm (in) | 3 750(147.6) | 4 000
(157.5) [4 300(169.3)] |
|
Floor space | mm (in) | 5 050 x 5 470 (198.8 x 215.4) | 5 130 x 6
560 (202 x 258.3) [5 730 x 6 560 (225.6 x 258.3)] |
||
Mass of machine (including NC equipment) | kg (lbs) | 22 000 (48 400) | 28 000 (61
600) [29 000 (63 800)] |
||
Accuracy |
Positioning accuracy | X, Y, Z | mm/min | +/-0.005 (0.0002)/full length | |
W | +/-0.010 (0.00039)/full length | ||||
Repeatability | X, Y, Z | +/-0.003 (0.00012) | |||
W | +/-0.008 (0.00031) | ||||
Table indexing accuracy (arbitrary angle) | sec | +/-3 | |||
Table indexing repeatability (arbitrary angle) | sec | +/-1.5 | |||
Machine colour |
R4-383 (Munsell 5Y8.4/0.5) and N2.5 For the NC system, servo motors and cooler, each maker's standard colour shall apply |
Notes:
Values in brackets [] refer to options.
Values in brackets {} are wide stroke type (option).
When measuring accuracy, there shall be no load on table.
Machine general views
Table top views
Spindle nose
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.