
BTH-130.R24
The BTH-130.R24 provides horizontal boring operation ability with machining centre productivity and flexibility.
Return to Machine Tool Line-upMachine Specifications | BTH-130.R24 | |||
Travel |
X-axis travel (Cross movement of table) | mm (in) | 3 000 (118) | |
Y-axis travel (Vertical movement of spindle head) | mm (in) | 2 300 (90.5) | ||
Z-axis travel (Longitudinal movement of table) | mm (in) | 1 500 (60) | ||
W-axis travel (Spindle extension) | mm (in) | 700 (28) | ||
Distance from table surface to spindle center | mm (in) | 900 to 2 400 (35.4 to 95.4) | ||
Distance from table center to milling spindle gauge plane | mm (in) | 0 to 2 300 (0 to 90.5) | ||
Table |
Table working surface | mm (in) | 2 000 x 2 400 (78.7 x 94.4) | |
Table loading capacity | kg (lbs) | 20 000 (44 000) | ||
Table surface configuration (Pitch to T-slots 160 mm (6.2 in), size 22 mm (0.86 in) |
13 T-slots | |||
Minimum table indexing angle (B- axis) | degrees | 0.0001 | ||
Spindle |
Spindle diameter | mm (in) | 130 (5.1) | |
Spindle speed range | min-1 | 5 ~ 2 500 [6 ~ 4 000] | ||
Feedrate |
Rapid traverse rate | X, Y Z | mm/min (ipm) | 14 000 (551.1) |
W | mm/min (ipm) | 5 000 (196.8) | ||
B | deg/min | 500 | ||
Feedrate | X, Y Z | mm/min (ipm) | 1 to 7 000 (0.04 to 275.5) | |
Automatic tool changer (ATC) |
Type of tool shank | MAS BT50 (CAT50) | ||
Tool storage capacity | 38[60,90,120] tools | |||
Spindle drive motor |
(30 min./cont. rating) | kW (HP) | AC22/18.5 (AC30/25) [AC30/22 (AC40/30)] |
|
Machine size |
Machine height | mm (in) | 5 060 (199.2) | |
Floor space | mm (in) | 7 250 x 6 950 (285.4 x 273.6) | ||
Mass of machine (including NC equipment) | kg (lbs) | 45 000 (99 000) | ||
Accuracy |
Positioning accuracy | X, Y, Z | mm/min (ipm) | +/-0.016 (+/-0.00063)/full length |
W | mm/min (ipm) | +/-0.012 (+/-0.00047)/full length | ||
Repeatability | X, Y, Z | mm/min (ipm) | +/-0.007 (+/-0.00027) | |
W | mm/min (ipm) | +/-0.008 (+/-0.00031) | ||
Machine colour |
R4-383
(ivory white) and N2.5 (dark gray) For the NC system, servo motors and cooler, each maker's standard colour shall apply |
Notes:
The values in the specifications indicate the maximum capacity and rating.
Please contact us for consultation if a
continuous operation is required at the maximum capacity
Values in brackets [] refer to North American version.
Machine general views

Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.