MPF-DS Series
Toshiba Machine's
New Technology in the 21st century for Die & Mold Machining.
Some features of the MPF-DS Series high-tech machines:
- State-of-the-art CNC equipment is loaded with a rich variety of die functions;
- Crossrail elevation expands machining range;
- Z-axis driven by twin ball screws eliminating the need of balancing device (patent).
Machine Specifications | MPF-2114DS | MPF-2614DS | MPF-3116DS | |||
Travel |
X-axis travel (table) | in (mm) | 55.1(1 400) | 74.8 (1 900) | ||
Y-axis travel (spindle head) | 82.7 (2 100) | 102.4 (2 600) | 122.0 (3 100) | |||
Z-axis travel (ram) | 28.1 (715) | |||||
Crossrail travel | 19.7 (500) [9.8 (250) pitches, 3 positions] | |||||
Height (distance from table top to spindle en) | 55.1 (1 400) | |||||
Distance between columns (max. width of workpiece which can go through) | 82.7 (2 100) | 102.4 (2 600) | 122.0 (3 100) | |||
Table |
Table working surface | in (mm) | 70.9 x 55.1 (1 800x1 400) |
78.7 x 55.1 (2 000x1 400) |
110.2 x 63.0 (2 800x1 600) |
|
Table loading capacity | lbs (kg) | 22 046 (10 000) | ||||
T-slot size (JIS) | in (mm) | 0.9 (24) wide. Provided @ 7.9 (200) pitches in the longitudinal table direction. | ||||
Spindle |
Spindle speed range (cont.) | mim-1 | 40 ~ 10 000 | |||
Type of spindle taper hole | 7/24 taper No.50 | |||||
Maximum spindle torque | lbs·ft (kgf·m) | 390 (54) | ||||
Spindle bearing inner diameter | in (mm) | 3.74 (95) | ||||
Spindle ram |
Type | Open ram type | ||||
Guideways | Roller guide | |||||
Section | in (mm) | 15.0 x 15.0 (380 x 380) | ||||
Feedrate |
Rapid traverse {X, Y & Z axis} | ipm(mm/min) | 787.4 (20 000) | |||
Feedrate {X, Y & Z axis} | 0.1 ~ 393.7 (1 ~ 10 000) | |||||
Tool |
||||||
Tool shank | MAS BT50 | |||||
Retention knob | MAS P50T-1 (45°) | |||||
Motors |
Spindle speed motor
[25%ED/cont. rating] |
HP(kW) | AC 34.8/20.1 (26/15) | |||
Feed motors | X-axis | AC 7.4 (5.5) | ||||
Y-axis | AC 7.4 (5.5) | |||||
Z-axis | AC 7.4 (5.5) x 2 | |||||
Power sources |
Electrical power supply | AC 220/200V +/-10%, 60/50 Hz +/- 1 Hz | ||||
Power sources requirement (incl. options) | kVA | 78 [power supply for air compressor shall be provided separately by customer] | ||||
Compressed air supply | psi(MPa) | 72.5 ~ 116 (0.5 ~ 0.8) | ||||
Tank capacity |
||||||
Hydraulic oil tank capacity | gal(L) | 15.9 (60) | ||||
Spindle cooling oil tank capacity | 29.1 (110) | |||||
Machine size |
Height | in(mm) | 203.1 (5 160) | |||
Floor area | 222.4 x 174.4 (5 650 x 4 430) |
242.1 x 174.4 (6 150 x 4 430) |
271.7 x 232.3 (6 900 x 5 900) |
|||
Mass | lbs (kg) |
62 390 (28 300) |
65 918 (29 900) |
76 059
(34 500) |
||
CNC system |
||||||
TOSNUC 888.2 (triple eight double) | ||||||
Accuracy |
||||||
Positioning accuracy | in(mm) | +/-0.00028 (0.007) per full length | ||||
Repeatability | +/-0.00012 (0.003) | |||||
Machine colour |
||||||
Standard exterior paint color | R4-383 (Munsell 5Y8.4/0.5) and N2.5 [Two-tone color] | |||||
Standard interior paint color | Munsell 10YR8/4 |
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.